Integrative Bodybuilding
FT Most Frequently Questions asked here on the Forum - Printable Version

+- Integrative Bodybuilding (http://drscottstevenson.com/forum)
+-- Forum: Fortitude Training - The Forum (http://drscottstevenson.com/forum/forum-53.html)
+--- Forum: Fortitude Training™ - Program Info, Basics, Testimonals (http://drscottstevenson.com/forum/forum-54.html)
+--- Thread: FT Most Frequently Questions asked here on the Forum (/thread-706.html)

Pages: 1 2


RE: FT Most Frequently Questions asked here on the Forum - Scott Stevenson - 07-16-2017

(07-16-2017, 07:42 PM)nordan Wrote: Both very good suggestions Scott however I am leaning towards option 1 as I don't want any further repercussions down the line.

I'm not sure what repercussions you mean. Actually unilateral training will create a cross-over effect that sustains strength in the untrained limb.

Quote:With option/suggestion 1 how would that work doing MR's ? Say for example my leg Press thigh set consisted of 375kg 6x4 (9 tonne total volume) how would one offset and even get to that doing solely open kinetic chain exercises ? My gyms pretty limited in terms of leg equipment so for the time being ill have leg extension and lying leg Curl at my disposal. I typically use DB lying Ham, SDL's / RDL's, smith squats, leg Press machines etc but all of these are out of the question due to limited ankle stability and pressure that I can subdue too.

If you can't do 2 sets of what would be 8-12 during a compound that hits the quad, hams and glutes, do 2 sets of 8-12 each for isolation open chain exercises for each of these muscle groups.

Can't do 2 x 10 legs press
Do instead: 2 x 10 knee ext, 2 x 10 ham curl, 2 x 10 ankle cuff glute extension or some sort.

Quote:Do you think an alternative option instead of training heavy legs is to just focus on upper body ? Jump from tier II up to Tier III? I know calorie output won't be anywhere as near but it'll be as close as it can get. I have two weeks left of tier II.

<sarcasm on>
Another option would be to not train at all. You could just swim, surf the web all day, or take up billiards, too.
<sarcasm off>

Yes, of course you could just not train legs altogether if you wanted to and completely rest.

Smile

-S


FT Most Frequently Questions asked here on the Forum - nordan - 07-17-2017

(07-16-2017, 10:11 PM)Scott Stevenson Wrote: I'm not sure what repercussions you mean. Actually unilateral training will create a cross-over effect that sustains strength in the untrained limb.


If you can't do 2 sets of what would be 8-12 during a compound that hits the quad, hams and glutes, do 2 sets of 8-12 each for isolation open chain exercises for each of these muscle groups.

Can't do 2 x 10 legs press
Do instead: 2 x 10 knee ext, 2 x 10 ham curl, 2 x 10 ankle cuff glute extension or some sort.


<sarcasm on>
Another option would be to not train at all. You could just swim, surf the web all day, or take up billiards, too.
<sarcasm off>

Yes, of course you could just not train legs altogether if you wanted to and completely rest.

Smile

-S


Scott, you're the man. Cheers


Sent from my iPhone using Tapatalk


RE: FT Most Frequently Questions asked here on the Forum - Scott Stevenson - 07-17-2017

(07-17-2017, 01:03 AM)nordan Wrote: Scott, you're the man. Cheers

LOL!!! Sure.

(BTW< I might move these posts out of this thread as this one is for the most frequently asked Q's.

Either a new thread or this one is where most FT Q's have been going:

FT Questions....

-S


RE: FT Most Frequently Questions asked here on the Forum - Squirrila - 08-16-2018

Hey scott, i have a few questions, sorry if they have been asked already but couldnt really find what i am looking for.

when it comes to warming up, for legs would you suggest warming up on each exercise, so say we are doing Squats, leg extensions and laying dumbell curls.

if you were squatting 150kgs for 6 reps, and say doing leg extensions of 35kgs for 8 reps, and 30kg dumbell for 8 reps with hamcurls, would you do something like this

squats :
60kgs for 8 reps
80kgs for 6 reps
100kgs for 3 reps
120 for for 2 reps
140 for 1 rep

and then for each other exercise do 1 or 2 "feel sets" to get the blood moving and go into your working sets?

or would you do 1 set of squats, 1 set of leg ext, 1 set hamstring curls and repeat 3x and go straight into the working sets 1 after the other?

so :
squat 60kgs
leg ext 20kgs
ham curl 15kgs

squat 80kgs
leg ext 25kgs
ham curl 20kgs

and then working sets would be
squat 150kgs for 8 reps,
rest 1.5mins
leg ext 35kgs
rest 1.5mins
ham curl 30kgs

sorry if that seems all over the show?

next question is regards to rotations and loading sets,

do you need to alternate between 3 exercises or would 2 suffice?
week 1 deadlift
week 2 rack pull
week 3 deadlift
week 4 rack pull

and then your pump sets use things like rows? bent over/cable/Db row?

my gym can be quite limited interms of equipment too (has a shit load of weights and a good couple machines but sometimes there is limited stuff)

so i am looking for more quad exercises, so far i have got leg ext and somersault squats, are there others you would suggest?

would you consider a Reverse hack squat as thigh exercise?

when it comes to Loading pump and MR exercises could you do something like this :
Week 1
Load Incline smith
pump decline smith
MR Chest press machine

Week 2
Load decline smith
Pump Incline smith
MR chest press machine?

week 3
Load Decline Dumbell press
Pump Chest press machine
Muscle round Incline smith?

i am currently nursing a rotator cuff injury so those exercises dont seem to cause trouble in the shoulder.

when it comes to progression, do you keep each rotation seperate?
week 1 loading Decline Smith : 100kgs for 8 reps
week 2 loading, Incline smith : do i try and better the weight used for Decline? or do i treat this as its own individual weight used?

if i have lagging glutes, can i add in a glute exercise to the leg rotations? things like glute pull throughs,Hip trusts and reverse lunges? or would you suggest adding glutes into the warm up to make sure that they activate and fire during a squat, hack squat or smith squat and not take the glutes to failure?

when starting the FT cycle, say i was to pick the wrong weight for say pull ups, and i started with body weight, is it train smash to take the set past the 12 rep mark and say fail at 14 reps, and then make note of this and adjust the following session?

now i say you say in the book try and do reps continuously, now if you are squating 150kgs and you get to 6 reps and you are pretty gassed and you take 2 deep breaths before completing the last 1 or 2 reps, is this ok or do you feel that if thats the case dont try and do more reps?

would you recommend doing any banded work? example, banded stiff legged deadlifts with the band pulling your hips back?

sorry for the 1001 and questions, i bought this ebook ages ago and through personal circumstances never got around to training this way, but now that i am going to start this plan, i had more questions than i knew what to do with.

thanks for the great information and program, i am really looking forward to this.




RE: FT Most Frequently Questions asked here on the Forum - Scott Stevenson - 08-16-2018

(08-16-2018, 08:37 PM)Squirrila Wrote: Hey scott, i have a few questions, sorry if they have been asked already but couldnt really find what i am looking for.

when it comes to warming up, for legs would you suggest warming up on each exercise, so say we are doing Squats, leg extensions and laying dumbell curls.

if you were squatting 150kgs for 6 reps, and say doing leg extensions of 35kgs for 8 reps, and 30kg dumbell for 8 reps with hamcurls, would you do something like this

squats :
60kgs for 8 reps
80kgs for 6 reps
100kgs for 3 reps
120 for for 2 reps
140 for 1 rep

and then for each other exercise do 1 or 2 "feel sets" to get the blood moving and go into your working sets?

or would you do 1 set of squats, 1 set of leg ext, 1 set hamstring curls and repeat 3x and go straight into the working sets 1 after the other?

so :
squat 60kgs
leg ext 20kgs
ham curl 15kgs

squat 80kgs
leg ext 25kgs
ham curl 20kgs

and then working sets would be
squat 150kgs for 8 reps,
rest 1.5mins
leg ext 35kgs
rest 1.5mins
ham curl 30kgs

sorry if that seems all over the show?

Warmups (load and reps) are entirely up to you, but I'd suggest doing at least one set of the isolation exercises to be sure the exercise feels OK, the machine is working, etc.

Everyone is different when it comes to warm-ups, just like the approach to doing a heavy set is different (in terms of visualization, adrenalizing, etc.). You may need to warm-up differently each day.


Integrative Bodybuilding

Quote:next question is regards to rotations and loading sets,

do you need to alternate between 3 exercises or would 2 suffice?
week 1 deadlift
week 2 rack pull
week 3 deadlift
week 4 rack pull

You don't need to do anything. Smile Smile Smile

If you choose just two exercise rotations to rotate, this is not ideal for some folks. There can be some short term practice effects that contribute to the strength gains such that you plateau prematurely. (I've covered this one a few times now. )

Quote:and then your pump sets use things like rows? bent over/cable/Db row?

Exercise selection for Pump sets (and all set types) is covered in the book. Smile

(Asking me to tell you what exercises to do is like asking me to order a meal for you when I don't know what kind of food you like. Smile I don't known your physique, nor which exercises work for you as far as feeling the target muscle, how well you low back holds up to unsupported rowing and deadlifting in the same week, etc. Literally, my best guidance is written out in the book, so I'd re-read those sections on page 90 or so. Smile )

Quote:my gym can be quite limited interms of equipment too (has a shit load of weights and a good couple machines but sometimes there is limited stuff)

so i am looking for more quad exercises, so far i have got leg ext and somersault squats, are there others you would suggest?

would you consider a Reverse hack squat as thigh exercise?

Smith sissy hack
Lap bar squats
Somersault squat
trap bar deadlift

I'll let you think about the reverse hack squat. (Where do you feel it?...)

Quote:when it comes to Loading pump and MR exercises could you do something like this :
Week 1
Load Incline smith
pump decline smith
MR Chest press machine

Week 2
Load decline smith
Pump Incline smith
MR chest press machine?

week 3
Load Decline Dumbell press
Pump Chest press machine
Muscle round Incline smith?

i am currently nursing a rotator cuff injury so those exercises dont seem to cause trouble in the shoulder.

That's a nice way to spread the load over the pecs, but you still need to auto regulate exercise selection for MRs and Pump Sets, per the book.

Quote:when it comes to progression, do you keep each rotation seperate?
week 1 loading Decline Smith : 100kgs for 8 reps
week 2 loading, Incline smith : do i try and better the weight used for Decline? or do i treat this as its own individual weight used?

I've answered this one quite a bit, too. (Did you really search?...)

Each rotation separate and progress could be on just one exercise in a rotation.

Quote:if i have lagging glutes, can i add in a glute exercise to the leg rotations? things like glute pull throughs,Hip trusts and reverse lunges? or would you suggest adding glutes into the warm up to make sure that they activate and fire during a squat, hack squat or smith squat and not take the glutes to failure?

GLutes are part of thighs. Make your thigh exercises glute focused.

Quote:when starting the FT cycle, say i was to pick the wrong weight for say pull ups, and i started with body weight, is it train smash to take the set past the 12 rep mark and say fail at 14 reps, and then make note of this and adjust the following session?

What else would you do?...

Quote:now i say you say in the book try and do reps continuously, now if you are squating 150kgs and you get to 6 reps and you are pretty gassed and you take 2 deep breaths before completing the last 1 or 2 reps, is this ok or do you feel that if thats the case dont try and do more reps?

The sets over if you can't keep the reps continuous and don't have the mental strength to keep from taking that breath. (If you need to adjust stance, etc., that's fine, but if you stop b/c you simply can't keep yourself from doing so, you're not executing the set correctly, so you'll need to work on that.

Quote:would you recommend doing any banded work? example, banded stiff legged deadlifts with the band pulling your hips back?

For you, no. You're overly complicating things as is.

Quote:sorry for the 1001 and questions, i bought this ebook ages ago and through personal circumstances never got around to training this way, but now that i am going to start this plan, i had more questions than i knew what to do with.

thanks for the great information and program, i am really looking forward to this.

Sure, but you should really re-read the book (and try a bit harder to search the forum), IMO.

I have the strong sense that much of what you're asking about is simply b/c you don't trust your own judgement and that is something that need to come into play with FT. Smile

Imagine what you would say to another person if they asked you these questions, e.g., about exercise selection and order, etc. You'd probably have no hesitation in giving the answer you've already come up with. Smile

-S



RE: FT Most Frequently Questions asked here on the Forum - Kwaldman - 06-29-2024

Hi, I hope this is the right thread for this question: On page 133 you refer to Pulse Sets (in the plan for day 3). I couldn’t find this therm in the book before. I am into bodybuilding etc. since 1998 but don’t know what’s meant… could you please clarify this for me? Thank you! Smile


RE: FT Most Frequently Questions asked here on the Forum - Joni - 06-30-2024

Hello, 
If you check the guidance under how to do muscle rounds you'll find:
"NOTE: Pump Sets are used instead of Muscle Rounds on lower Volume Tiers for
Days 3 and 4 for small muscle groups (arms, abs, forearms) as a lower volume
stimulus."


I believe the pulse sets are pump sets, but you could do them anyway you prefer. 5's in the hole for example has pulses in between full reps. 
If I got this wrong, I'm sure Scott will correct me. 
Good luck !


RE: FT Most Frequently Questions asked here on the Forum - Scott Stevenson - 08-05-2024

(06-30-2024, 01:03 AM)Joni Wrote: Hello, 
If you check the guidance under how to do muscle rounds you'll find:
"NOTE: Pump Sets are used instead of Muscle Rounds on lower Volume Tiers for
Days 3 and 4 for small muscle groups (arms, abs, forearms) as a lower volume
stimulus."


I believe the pulse sets are pump sets, but you could do them anyway you prefer. 5's in the hole for example has pulses in between full reps. 
If I got this wrong, I'm sure Scott will correct me. 
Good luck !

Hey Joni!

You are correct!
Yes, if the book says "Pulse Sets," that's a typo.  Pump Sets, as you note, can of course including "pulsing (partial) reps)," but the set type is called a Pump Set. Smile 

-Scott


Approaches to implement charismatic gifts to achieve your goal - Migueldiuth - 11-01-2024

Self-care
The role of spiritual talents in spiritual advancement dee7bb6